How To Load A Box Tape Dispenser

How To Load A Box Tape Dispenser. You will start off by inserting your roll of packaging tape, i.e., scotch, onto the big dispenser wheel. Take care not to be cut on the blade during this stage.

Scotch Packaging Tape Gun Dispenser with 2 Rolls for 10.68 Shipped from www.spoofee.com

This will cut the tape off. Thread the tape over the water brush and under the blade. Now we’re ready to place the tape between the ‘gate’ and the ‘roller’.

But Dispensers Come In Different Models, So Let’s Look At Another Way Of How To Load A Packing Tape Dispenser:

Remove all of the excess tape. Load the tape dispenser with the sticky side of the tape facing away from the blade edge. Firmly press the tape into position.

Thread The Tape Over The Water Brush And Under The Blade.

Slide the roll into the cradle with loose tape towards the back of the dispenser. Loading a packaging tape dispenser varies between different models. Once you reach the other end of the box, tilt the dispenser forward, pull down, and twist.

The Sticky Side Of The Tape Should Face Down.

Place about 5 to 6 inches of tape between the metal gate and the roller to keep it in place. Unfold your box and place it on a flat surface with the top facing down. Ensure that the tape is in constant contact with the box until you reach the other end.

Place Your New Roll Of Packing Tape Onto The Wheel Of The Dispenser.

Founder and ceo of usedcardboardboxes.com demonstrates how to load a tape dispenser for assembling your moving boxes A video showing how to use and load packing tape dispenser. Glide the dispenser across the surface.

Press The Metal Tab On The Gate To Keep It Open.

Pull the front tab of the tape roll through the slot between the dispenser roller and shield. Buy a roll of tape. Weave the tape over the roller, gummed side up, and underneath the entire tape roll.